The tool does its job. Knowing how to make it do its job is something else. Someone at the Keyboard Co was good enough to advise me about that, but, really, instructions need to be made easily available.
Rated 5 out of 5
Frank –
Man, that key puller can really pull keys.
Rated 5 out of 5
Maurice –
Easier to use than a ring puller for larger keys, and of course it can also be used on other keyboard types. Well made too, this one will last a good few years.
Rated 5 out of 5
🍪biscuits✨ –
Worked fine, got the caps of my DAS Keyboard 4C Ultimate without damaging anything.
Rated 5 out of 5
Ivan –
I ordered this as a tool to help me maintain the hygiene of my keyboard.
I am very satisfied with the utility it provides.
Built quality is very good.
Rated 5 out of 5
Richard –
Always satisfying to have the right tool for the job. Works well, and came in authentically-Japanese packaging which adds to the sense of quality!
Rated 5 out of 5
Outtheredude –
Nice quality affordable key cap puller, which I got two of with another order, with which I was able to pull longer key caps, such as the space bar, with ease.
Rated 5 out of 5
Dumitru Rob –
Does what it says on the box. Well, technically speaking, there is no box, but…
Works way better than the crappy plastic pullers that are bundled with almost every mech keyboard.
Rated 5 out of 5
Anonymous –
Does the job as advertised.
I was a bit worried because I’d seen another wire key puller being used on a particularly stuck cap and it broke and since I got mine to use on Matias switches, which are notoriously stubborn, I was afraid the same might happen to it, but so far no key cap was able to resist it.
I was also worried that the thin wire would dig into the key caps, but the 4 contact points are plenty to avoid any damage.
If anything it’s working too well, on my left Ctrl key, the puller actually lifted the corner of the switch board.
Rated 5 out of 5
Anonymous –
Does what it says on the packet. Pulls keys efficiently and effectively.
Rated 5 out of 5
Anonymous –
Makes pulling keycaps really easy in order to clean the keyboard and keycaps!
Rated 5 out of 5
Anonymous –
Very useful tool for removing the keys to add the Red O-Ring Switch Dampeners to the Filco keyboard I purchased. Pulls keys off firmly and evenly but watch out for stablisers on longer keys – they are tricky to replace. I’d suggest watching the YouTube videos before attempting it.
Rated 5 out of 5
Thet –
Works as advertised at a very decent price. Better than the keycap puller that came free with my keyboard.
Rated 5 out of 5
Anonymous –
It does what it should do. But I’m only using this for the larger keys and for the smaller ones, I use a ring key puller that’s more efficent than this wire key puller.
Rated 5 out of 5
Vincent –
Worked as advertised. Useful tool. SAFE removal of keycaps 🙂
Rated 5 out of 5
Anonymous –
Ordered to remove Windows keys (Filco keyboard) without damaging the keyboard.
Worked as expected.
Rated 5 out of 5
Kris –
Serves its purpose- and well!
Able to remove any keycap with relative ease (for a complete beginner). This key puller, unlike many others, can remove 1×1 keycaps more efficiently such as the long Shift, Backspace key and Spacebar as it grabs opposite corners of those keys instead of the middle of them.
Note for Filco users (among some other keyboard brands) be careful when removing the said above keys as they may have stabilisers under them, needing more care as they need to be disconnected from the keycap before fully removing it.
Only logged in customers who have purchased this product may leave a review.
17 reviews for Filco Black Key Puller
Rated 3 out of 5
Anonymous –
The tool does its job. Knowing how to make it do its job is something else. Someone at the Keyboard Co was good enough to advise me about that, but, really, instructions need to be made easily available.
Rated 5 out of 5
Frank –
Man, that key puller can really pull keys.
Rated 5 out of 5
Maurice –
Easier to use than a ring puller for larger keys, and of course it can also be used on other keyboard types. Well made too, this one will last a good few years.
Rated 5 out of 5
🍪biscuits✨ –
Worked fine, got the caps of my DAS Keyboard 4C Ultimate without damaging anything.
Rated 5 out of 5
Ivan –
I ordered this as a tool to help me maintain the hygiene of my keyboard.
I am very satisfied with the utility it provides.
Built quality is very good.
Rated 5 out of 5
Richard –
Always satisfying to have the right tool for the job. Works well, and came in authentically-Japanese packaging which adds to the sense of quality!
Rated 5 out of 5
Outtheredude –
Nice quality affordable key cap puller, which I got two of with another order, with which I was able to pull longer key caps, such as the space bar, with ease.
Rated 5 out of 5
Dumitru Rob –
Does what it says on the box. Well, technically speaking, there is no box, but…
Works way better than the crappy plastic pullers that are bundled with almost every mech keyboard.
Rated 5 out of 5
Anonymous –
Does the job as advertised.
I was a bit worried because I’d seen another wire key puller being used on a particularly stuck cap and it broke and since I got mine to use on Matias switches, which are notoriously stubborn, I was afraid the same might happen to it, but so far no key cap was able to resist it.
I was also worried that the thin wire would dig into the key caps, but the 4 contact points are plenty to avoid any damage.
If anything it’s working too well, on my left Ctrl key, the puller actually lifted the corner of the switch board.
Rated 5 out of 5
Anonymous –
Does what it says on the packet. Pulls keys efficiently and effectively.
Rated 5 out of 5
Anonymous –
Makes pulling keycaps really easy in order to clean the keyboard and keycaps!
Rated 5 out of 5
Anonymous –
Very useful tool for removing the keys to add the Red O-Ring Switch Dampeners to the Filco keyboard I purchased. Pulls keys off firmly and evenly but watch out for stablisers on longer keys – they are tricky to replace. I’d suggest watching the YouTube videos before attempting it.
Rated 5 out of 5
Thet –
Works as advertised at a very decent price. Better than the keycap puller that came free with my keyboard.
Rated 5 out of 5
Anonymous –
It does what it should do. But I’m only using this for the larger keys and for the smaller ones, I use a ring key puller that’s more efficent than this wire key puller.
Rated 5 out of 5
Vincent –
Worked as advertised. Useful tool. SAFE removal of keycaps 🙂
Rated 5 out of 5
Anonymous –
Ordered to remove Windows keys (Filco keyboard) without damaging the keyboard.
Worked as expected.
Rated 5 out of 5
Kris –
Serves its purpose- and well!
Able to remove any keycap with relative ease (for a complete beginner). This key puller, unlike many others, can remove 1×1 keycaps more efficiently such as the long Shift, Backspace key and Spacebar as it grabs opposite corners of those keys instead of the middle of them.
Note for Filco users (among some other keyboard brands) be careful when removing the said above keys as they may have stabilisers under them, needing more care as they need to be disconnected from the keycap before fully removing it.
Only logged in customers who have purchased this product may leave a review.
Overview
This purpose made key puller was designed for Filco’s range of professional keyboards, but will work equally well for all keyboards, push the wire end over the key then pull upwards and the key top should come away from the keyboard, particularly useful for swapping your WAS and D keys for one of the sets below.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behaviour or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behaviour or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Anonymous –
The tool does its job. Knowing how to make it do its job is something else. Someone at the Keyboard Co was good enough to advise me about that, but, really, instructions need to be made easily available.
Frank –
Man, that key puller can really pull keys.
Maurice –
Easier to use than a ring puller for larger keys, and of course it can also be used on other keyboard types. Well made too, this one will last a good few years.
🍪biscuits✨ –
Worked fine, got the caps of my DAS Keyboard 4C Ultimate without damaging anything.
Ivan –
I ordered this as a tool to help me maintain the hygiene of my keyboard.
I am very satisfied with the utility it provides.
Built quality is very good.
Richard –
Always satisfying to have the right tool for the job. Works well, and came in authentically-Japanese packaging which adds to the sense of quality!
Outtheredude –
Nice quality affordable key cap puller, which I got two of with another order, with which I was able to pull longer key caps, such as the space bar, with ease.
Dumitru Rob –
Does what it says on the box. Well, technically speaking, there is no box, but…
Works way better than the crappy plastic pullers that are bundled with almost every mech keyboard.
Anonymous –
Does the job as advertised.
I was a bit worried because I’d seen another wire key puller being used on a particularly stuck cap and it broke and since I got mine to use on Matias switches, which are notoriously stubborn, I was afraid the same might happen to it, but so far no key cap was able to resist it.
I was also worried that the thin wire would dig into the key caps, but the 4 contact points are plenty to avoid any damage.
If anything it’s working too well, on my left Ctrl key, the puller actually lifted the corner of the switch board.
Anonymous –
Does what it says on the packet. Pulls keys efficiently and effectively.
Anonymous –
Makes pulling keycaps really easy in order to clean the keyboard and keycaps!
Anonymous –
Very useful tool for removing the keys to add the Red O-Ring Switch Dampeners to the Filco keyboard I purchased. Pulls keys off firmly and evenly but watch out for stablisers on longer keys – they are tricky to replace. I’d suggest watching the YouTube videos before attempting it.
Thet –
Works as advertised at a very decent price. Better than the keycap puller that came free with my keyboard.
Anonymous –
It does what it should do. But I’m only using this for the larger keys and for the smaller ones, I use a ring key puller that’s more efficent than this wire key puller.
Vincent –
Worked as advertised. Useful tool. SAFE removal of keycaps 🙂
Anonymous –
Ordered to remove Windows keys (Filco keyboard) without damaging the keyboard.
Worked as expected.
Kris –
Serves its purpose- and well!
Able to remove any keycap with relative ease (for a complete beginner). This key puller, unlike many others, can remove 1×1 keycaps more efficiently such as the long Shift, Backspace key and Spacebar as it grabs opposite corners of those keys instead of the middle of them.
Note for Filco users (among some other keyboard brands) be careful when removing the said above keys as they may have stabilisers under them, needing more care as they need to be disconnected from the keycap before fully removing it.