+44(0)1453 884938  
0845 2055555  
Use our old website
Switches

Cherry Key Switch Module, Clear, Hard Tactile

MX1A-C1NN

Lots In Stock

The Cherry MX 'clear' hard tactile key switch, to fit Filco keyboards, perfect for a switch swap or to make your own keyboard!
On it's base this has 2 solder pins and a large plastic locator pin, but it does not have the 2 smaller fixing pins found on some Cherry switches, and does not include a diode or LED.

£1.20 (£1.00 ex VAT)

Cherry Key Switch Module, Clear, Hard Tactile - MX1A-C1NN

 
Electrical characteristics
Switching voltage 12 V AC / DC max.
Switching current 10 mA AC / DC max.
Dielectric strength 500 V / 50 Hz
Durability at 5V, 1mA 50,000,000
Mechanical characteristics
Contact configuration Single-pole contact
Action Ergonomic
Actuator travel 4 0.5 mm
Pretravel 2 0.6 mm
Initial force 25 cN min.
Actuation force 55 15 cN apx.
Pressure point force 65 15 cN
Bounce time during actuation with 0.4 m/s <5 ms
Standard lead spacing 19.05 mm (16 mm min.)
Fastening Snap fastening in frame
Materials
Insulation materials Thermoplastics (min.UL 94 HB)
Spring Stainless steel
Contacts High-quality gold alloy
Other Characteristics
Protection class IP 40
Operating temperature -10 C to +70 C
Storage temperature -40 C to +70 C
Humidity (without condensation) 5 % to 95 %

Cherry Key Switch Module, Clear, Hard Tactile - MX1A-C1NN

Part Number
MX1A-C1NN
Connection
Without fixing pins
Number of keys/buttons
1
Switch Type
Cherry MX Clear
Length
16 mm
Depth
16 mm
Height
19 mm
Weight
10 g
Compatible
Filco keyboards
Gross Weight
10 g

Cherry Key Switch Module, Clear, Hard Tactile - MX1A-C1NN

Leave a review